The BiggsFix Tuning Stabilizer Version 2 (BTS-V2-G) fits Bigsby models B5, B7 and B12. If you are experiencing too much down pressure and your string angle over the bridge is extreme, then adding the BTS-V2-G results in your string angle more closely matching that of Bigsby's non-tension roller vibrato systems. This version mounts with Stub Axle mounting screws. No need to thread strings between Biggsfix roller and stock axle. Axle is not used for attachment.
BTS-V2-G is not recommended for Bigsbys mounted on the Vibramate adapter plate. For this application look at the BiggsFix Tuning Stabilizer Version 2 Dual Elevation (BTS-V2-DE-G) which has 2 sets of holes. One set matches the original BricksBiggsFix relief, the other has 1.5mm less relief to compensate for the adapter plate.
Most USA made Bigsbys have an axle retaining set screw on the bottom of the Bigsby. This pesky little set screw requires a 5/64" Hex Key Wrench. If you need one, consider adding one to your order.
Also, consider adding a Super Squishy Spring to your order. While not increasing tuning stability, it WILL increase your playing pleasure!
Telecaster is excluded from the list of guitars the stabilizer works with. There isn't quite enough tension left to hold the strings on the saddles when the stabilizer is installed.